TSwatch International - The Best Replica Watch Web Site

Testimonials

Noobfactory V9S Rolex Submariner Page Views:(3047)

14-Nov-2019

You will see overwhelming information if you search for Rolex Submariner of NOOBFACTORY through GOOGLE. The problem of "BEZEL fading" is indeed very serious and difficult, so why did the last batch of Rolex Submariners have the problem of fading? Acctually, the production process of BEZEL has always followed the steps from ceramic formation and laser calibration to oil filling and electroplation. There has never been a phenomenon of fading! What happened when many bezels of V8 began fading? Well, a problem occurred in the process of oil filling and electroplating in the produ-ction of the bezels. The most fundamental reason was that the storage environment was poor. They were not stored in accordance with the storage standard, resulting in a large amount of moisture in the BEZELs. At that time, NOOBFACTORY was handling the shipment of DAYTONA, 4130 and 3135 were being tested for stability, and the latest BEZEL process for Rolex Submariner was beginning designed. Since there would be a new BEZEL soon, the problem could be temporarily suspended. No one expected that the suspension brought “unrecoverable” losses to consumers. Therefore, it is urgent to upgrade. Over a short period of V9, Rolex Submariner was immediately upgraded to V10 (stainless steel 904L ) using the latest BEZEL technology. V9S (stainless steel 316L) has also been upgraded immediately after that.

The bezels in this batch are all made by a ceramics plant in Korea. It is not that domestic ceramics are not good, but that Korean ceramics is indeed better than the domestic ones we know in that the bezels made of their ceramics have no impurities with many experiments and they are a lot more expensive. We have talked a lot about V10 in terms of its production process. Well, V10 is oiled and electroplated in strict accordance with the process flow and standard. It promises never fading. The BEZEL can be replaced free of charge if there is fading. Only with enough confidence in their products will NOOBFACTORY make such a commitment!

The exclusive BEZEL production process technology of NOOBFACTORY makes the whole ceramics more pure, allowing Rolex Submariner Black to be blacker as black ceramics have no impurities and Rolex Submariner Green to be greener.

The fundamental difference between V9S and V10 is the difference between stainless steel 316L and stainless steel 904L. These two steels are almost indistinguishable from the naked eye. As for other versions, we do not analyze the authenticity of their stainless steel 904L. Both 316L and 904L steel are available in NOOBFACTORY. V9S is stainless steel 316L while V10 is stainless steel 904L.

There are always people who like to ask about the anti-counterfeit tag with a small crown. Actually, even the cheapest low-end products have it. So we specifically mark it here just to remind the friends who have the concern!

The edge polishing method of the bezel is a very detailed thing. Most people will not pay attention to it or simply do not know that it is worth being concerned. The polishing method of the authentic Rolex Submariner is vertical polishing, but most of their shell-type edge is polished in a relatively cheap "horizontal polishing method".

The cost of such a polishing method is much cheaper, but it goes against the polishing principle for the authentic one, and NOOBFACTORY will not let go of any details like these.

Each link from the blank and the CNC processing to the polishing in the mill and the heat treatment is connected and very rigorous in the entire casing. The first two links are simple to control, but the third key link polishing is a link that tests the level of a polishing master. If there is a slight carelessness, there will be defects, especially the edge of the lug. The edge of the strap completely farewells to the feeling of hand cutting. It is said that the authentic watch feels a little warm in the hand while the replica feels cold. In fact, it is more a subconscious, psychological thing of a person than a problem of warmth or coldness. It is because people psychologically feel warm for smooth objects and cold for sharp ones. The upgrade thoroughly bid farewell to the problem by making great efforts in polishing.

The movement uses the same super 3135 as V10.

In the latest anti-counterfeiting version of V9S, each watch is equipped with an anti-counterfeit tag. The three-in-one security (one watch, one card and one code) ensures that you will never worry about buying a fake NOOBFACTORY watch.

There are two many replicas. Many consumers have spent the money worthy NOOBFACTORY Submariner buying a replica, and did not realize it, which is simply distressing. So in this upgrade Rolex Submariner have added a built-in chip for anti-counterfeit tag. As long as you have an NFC-enabled mobile phone and the tag is touched, you can read the data in the tag. Remember that the domain name of the web page to be read out must be "www.noobsfactory.com".

Only this domain name belongs to NOOBFACTORY. Even if the so-called imitations of NOOBFACTORY production would had anti-counterfeit tags later, they would have no way to use the domain name. If the web page read by the anti-counterfeit tag is not prefixed with "www.noobsfactory.com", the watch is not produced by NOOBFACTORY! Therefore, a security chip is important, but what is more important is the web page to be read. Make sure you are aware of it!

Category

Testimonials

Noobfactory V9S Rolex Submariner Page Views:(3047)

INFORMATION

PRODUCTS

NEWS